Needle control valve NCV-7DV
It is Suitable in fixed-quantity dispense of anaerobic liquid materials
It is Suitable in fixed-quantity dispense of anaerobic liquid materials
Needle control valve NCV-7DV
・By wetted part fluoric resin Specifications, it is most suitable for fixed-quantity dispense of anaerobic liquid material.
・Needle control valve that fixed-quantity dispense of liquid material with filler is possible.
| Model | NCV-7DV-2P |
|---|
|
| Drive system | Air operation rate type |
|---|
| The smallest dispensing volume | 8μL |
|---|
| Adaptation viscosity | ... 10Pa, s |
|---|
| Operation air Supply pressure is | 0.3 - 0.4MPa |
|---|
| Liquid material Supply pressure range | Up to 0.7MPa |
|---|
| Maximum reply number of times | 650 times of /min. |
|---|
| Connection diameter | Liquid material supply port | φ 6 X φ 4 Fluid feed coupling |
|---|
| Liquid material discharge opening | Lure lock |
|---|
| Operation air | One-touch coupling for external diameter φ 6 tube
(with speed controller) |
|---|
| Operating temperature limits | 5～50 degrees Celsius |
|---|
| Wetted part material | Fluoric resin, fluorine-containing rubber |
|---|
| Weight | 450 g |
|---|
| Adaptation liquid material | Anaerobic materials, materials with filler |
|---|
※ Dispensing volume of this Specifications, adaptation viscosity, adaptation materials, the greatest reply number of times are reference levels.
Needle control valve N 
Piston control valve P 