Rotating musashi Dispenser CIRCLE MASTER CCM-3H/CCM-3T,One-touch carries out circumferential dispensing!
One-touch carries out circumferential dispensing!
Rotating Dispenser CIRCLE MASTER CCM-3H/CCM-3T
・It is line-up with 2 models depending on use.
・Circumferential dispensing by rotating work piece.
・Dispensing available for both inner and outer circumferences.
・We cope with change of work diameter.
・It can store dispenser under the body.
(optional)
| Model | CCM-3H | CCM-3T |
|---|
| Rotating part | Drive system | Motor control (Output: 15W) |
|---|
| Number of revolutions | 5 - 150rpm |
|---|
| Rotating speed setting | Analog (the volume) setting |
|---|
| Run period of rotation setting of the sky | 0.1 - 9.9sec. |
|---|
| kahanshitsuryo | 4 kg |
|---|
| Head | Drive system | Air cylinder drive |
|---|
| The Z-axis's greatest stroke | 50? |
|---|
| Dispensing radius range | Up to a radius of 55mm (manual operation) | Up to a radius of 100mm (manual operation) |
|---|
| kahanshitsuryo | 1.5 kg |
|---|
| Angle adjusted | Head slant (up to 45 degrees) | Work table slant (up to ±30 degrees) |
|---|
| Air source | 0.4 - 0.6MPa |
|---|
| Power supply, Power consumption | AC100 - 240V 50/60 Hz, 120W |
|---|
| Weight | 5.7 kg | 5.2 kg |
|---|
| Optional | ・Prop (for MS-7, MS-10DX) for the body padding
・Various holders |
|---|
| Conformity standard | CE marking (low voltage order, EMC order)
EU RoHS
|
|---|
Simple syringe filling 
Centrifugal action remo 