)  (  )  ( English
Musashi Dispenser
  
Musashi Dispenser Digital control spray controller SPRAY MASTER ME-5000SP

Musashi Dispenser Digital control spray controller SPRAY MASTER ME-5000SP

Centrally manage dispensing conditions to achieve uniform spray musashi dispensing!

Digital control spray controller 
 SPRAY MASTER ME-5000SP・We improved pressure stability and solved fluctuations in dispensing quantity.

・By setting intervals, we added time between blow pressurization and drive, thus preventing liquid from dripping. 

・We achieved superior operability and reproducibility through digital control. 

・Dispensing conditions can be centrally managed by the controller. 

・Dispensing can be monitored through improved external interface, showing the power of the device's equipment.


ModelME-5000SP
Discharge pressure settingElectro/pneumatic method
Discharge pressure adjustable rangeFor feeding pressurized fluid0.005 - 0.700MPa (Precision regulator)
For blowing0.005 - 0.700MPa (Precision regulator)
For valve drive0.050 - 0.700MPa
Discharge time control circuitDigital timer circuit
Time setting rangeTime for valve operation0.01 - 99.99sec.
Valve opening interval0.000 - 9.999sec.
Valve closing interval0.000 - 9.999sec.
Display sectionLED digital display
External input and output signalInput (Signal with or without contact point)Discharge signal (Can switch between input with and without voltage)
Mode switch signal
Output (Output without contact point)Discharge completion signal
Signal during valve opening
Signal during blow opening
Mode status signal
Power supply ON signal
Tank pressure drop signal
Valve pressure drop signal
Blow pressure drop signal
Supply air pressureLess than 0.80 MPa
Power supply, Power consumptionAC100 - 240V, 50/60 Hz, Approx. 32 W
Exterior dimensions, weightW340 X D245 X H120.8 mm, approximately 5.8 kg


Musashi Dispenser 

Musashi Dispenser Digital control spray controller SPRAY MASTER ME-5000SP


Musashi Dispenser Digital control spray controller SPRAY MASTER ME-5000SP


Musashi Dispenser |Optional products

Air atomizing spray valve system SV-6 series /SVM-6LX

Perform spray coating of thin films for workpieces of all shapes

Perform spray coating of thin films for workpieces of all shapes

Twin-fluid spray valve
SV-6 series /SVM-6LXSV-6series

・Uniform film thickness through the exclusive nozzle.

・Prevents splashing by low-pressure atomization.

・Supports multiple heads.

・Full system line-up

SVM-6LX

・The cylinder's inner surface is coated by needle nozzle.

・Prevents splashing by low-pressure atomization.

・For Compact-size, light weight, it is available in small space.

explain_272__SVM-6LX.jpg

explain_273_robotmounted.jpg

Example equipment in desktop robot

The picture is the twin-spray valve system equipped with the SV-6.Musashi Dispenser ※ Pattern dimensions in distance 50mm are indication levels for maximum pattern dimensions distance 300mm (data which they sprayed water on under conditions of air pressure 0.3MPa, Fluid feed pressure 0.01MPa).

musashi dispenser Example equipment in desktop robot

musashi dispenser spray patem

explain_267_SV-6_SVM-6LX.gif

explain_269_kouseizu.jpg

Next-generation standar
musashi dispenser-Next-
 return
 
Musashi dispenser
 
No. 719-720, 7th floor, Thanh Dat 1 Building, No. 3 Le Thanh Tong Street, May To Ward, Ngo Quyen Dis    84 0393777211(杨正飞)
TOP