Needle control valve NCV-10-Valve_Peripheral device

Needle control valve NCV-10

Line-up which is abundant in Compact-size, light weight, various liquid materials and uses

Needle control valve NCV-10

・Dispense stable with liquid material with filler.

・1 port Discharge pressure setting that conversion from syringe method is easily.

・2 port Discharge pressure setting which is suitable in high precision dispense more.

・Fluoric resin Specifications type that is most suitable for dispense of corrosive high material and anaerobic liquid material, UV materials correspondence type are line-up.

Model		NCV-10 (standard Specifications)		NCV-10-T (fluoric resin Specifications)		NCV-10-U (UV Specifications)
Model		NCV-10-1P	NCV-10-2P	NCV-10-T-1P	NCV-10-T-2P	NCV-10-U-1P	NCV-10-U-2P
Drive system		Air operation rate type
The smallest dispensing volume		9μL	8μL	9μL	8μL	9μL	8μL
Adaptation viscosity		... 50Pa, s
Operation air Supply pressure is		0.35 ... 0.5MPa	0.3 ... 0.5MPa	0.35 ... 0.5MPa	0.3 ... 0.5MPa	0.35 ... 0.5MPa	0.3 ... 0.5MPa
Liquid material Supply pressure range		Up to 0.5MPa
Maximum reply number of times		640 times /min.	680 times /min.	640 times of /min.	680 times of /min.	640 times of /min.	680 times of /min.
Wetted part material		Aluminum, SUS Fluoric resin Brass (Ni plating)		SUS (fluoric resin coat) Fluoric resin		Polyacetal Fluoric resin SUS (fluoric resin coat)
Connection diameter	Liquid material supply port	Rc1/8 (Fluid feed successor places an order separately)
	Liquid material discharge opening	Lure lock
	Operation air	One-touch coupling (with speed controller) for external form φ 6 tube
Weight		140 g	160 g	120 g	140 g	120 g	140 g
Operating temperature limits		5～60 degrees Celsius
Adaptation liquid material		Low to moderate viscosity Overall liquid material		Anaerobic materials Materials with filler		UV materials

※ Dispensing volume of this Specifications, adaptation viscosity, the biggest reply number of times, adaptation liquid material are reference levels.