Rotating Musashi Dispenser CIRCLE MASTER CCM-3H/CCM-3T_DAWEI Intelligent Equipment Co., Ltd

Rotating musashi Dispenser CIRCLE MASTER CCM-3H/CCM-3T,One-touch carries out circumferential dispensing!

One-touch carries out circumferential dispensing!

Rotating Dispenser CIRCLE MASTER CCM-3H/CCM-3T

・It is line-up with 2 models depending on use.

・Circumferential dispensing by rotating work piece.

・Dispensing available for both inner and outer circumferences.

・We cope with change of work diameter.

・It can store dispenser under the body.

(optional)

Model		CCM-3H	CCM-3T
Rotating part	Drive system	Motor control (Output: 15W)
	Number of revolutions	5 - 150rpm
	Rotating speed setting	Analog (the volume) setting
	Run period of rotation setting of the sky	0.1 - 9.9sec.
	kahanshitsuryo	4 kg
Head	Drive system	Air cylinder drive
	The Z-axis's greatest stroke	50?
	Dispensing radius range	Up to a radius of 55mm (manual operation)	Up to a radius of 100mm (manual operation)
	kahanshitsuryo	1.5 kg
Angle adjusted		Head slant (up to 45 degrees)	Work table slant (up to ±30 degrees)
Air source		0.4 - 0.6MPa
Power supply, Power consumption		AC100 - 240V 50/60 Hz, 120W
Weight		5.7 kg	5.2 kg
Optional		・Prop (for MS-7, MS-10DX) for the body padding ・Various holders
Conformity standard		CE marking (low voltage order, EMC order) EU RoHS

	FDW(DAWEI)
	No. 719-720, 7th floor, Thanh Dat 1 Building， No. 3 Le Thanh Tong Street, May To Ward, Ngo Quyen Dis
	Tầng 6 Tòa nhà Dương Tuấn, P Võ cường, TP Bắc Ninh
	武孟想 (Giám bóc Kinh Doanh) MST: 0201931305 Mobile: 0978 650 432 Email: wmx@vnfdw.com
	三浦裕一 (SALES ENGINEER) TAX ID: 0105553096889 TEL: (66)02022 9015-16 FAX: (66)02 769 5450) HP: (66)095 562 6968 E-mail: miura@musashi-engineering.co.th