Digital control spray controller SPRAY MASTER ME-5000SP
Centrally manage dispensing conditions to achieve uniform spray dispensing!
Centrally manage dispensing conditions to achieve uniform spray dispensing!
Digital control spray controller SPRAY MASTER ME-5000SP
・We improved pressure stability and solved fluctuations in dispensing quantity.
・By setting intervals, we added time between blow pressurization and drive, thus preventing liquid from dripping.
・We achieved superior operability and reproducibility through digital control.
・Dispensing conditions can be centrally managed by the controller.
・Dispensing can be monitored through improved external interface, showing the power of the device's equipment.
| Model | ME-5000SP |
|---|
| Discharge pressure setting | Electro/pneumatic method |
|---|
| Discharge pressure adjustable range | For feeding pressurized fluid | 0.005 - 0.700MPa (Precision regulator) |
|---|
| For blowing | 0.005 - 0.700MPa (Precision regulator) |
|---|
| For valve drive | 0.050 - 0.700MPa |
|---|
| Discharge time control circuit | Digital timer circuit |
|---|
| Time setting range | Time for valve operation | 0.01 - 99.99sec. |
|---|
| Valve opening interval | 0.000 - 9.999sec. |
|---|
| Valve closing interval | 0.000 - 9.999sec. |
|---|
| Display section | LED digital display |
|---|
| External input and output signal | Input (Signal with or without contact point) | Discharge signal (Can switch between input with and without voltage) |
|---|
| Mode switch signal |
| Output (Output without contact point) | Discharge completion signal |
|---|
| Signal during valve opening |
| Signal during blow opening |
| Mode status signal |
| Power supply ON signal |
| Tank pressure drop signal |
| Valve pressure drop signal |
| Blow pressure drop signal |
| Supply air pressure | Less than 0.80 MPa |
|---|
| Power supply, Power consumption | AC100 - 240V, 50/60 Hz, Approx. 32 W |
|---|
| Exterior dimensions, weight | W340 X D245 X H120.8 mm, approximately 5.8 kg
|
|---|
Product 
）
）
