Gallon tank GAT,Lightweight tank perfect for pressure feeding of low viscosity liquid materials
Lightweight tank perfect for pressure feeding of low viscosity liquid materials
Gallon tank GAT
・In from low viscosity in low pressure feeding of viscosity liquid materials
Suitable.
・Be superior to handling ability at light weight; for conveyance
Convenience.
・Simplified mold tank for exclusive use of liquid materials direct injection.
・We cannot open cover at the time of pressurization
Safety structure.
・Customization to application of customer
But, it is possible.
| Capacity (L) | Model | External diameter dimensions
(mm) | A lower entry chamber
(mm) | Weight
(kg) | Material | Pressure | Attached parts |
|---|
| H | OD | A |
|---|
| About 11 | GAT-3G | 378 | φ 228 | 82 | 3.7 | Wetted part:
SUS304
Fluoric resin | 0.2MPa
(2kgf/cm2) | ・O-ring (fluorine-containing rubber
Silicone gum,
Nitrile rubber,
Butyl rubber)
・Safety valve *
・Quick joint |
| About 19 | GAT-5G | 565 | φ 228 | 82 | 4.3 |
＊Setting pressure 0.2MPa (2kgf/cm2) of safety valve.
Product 
）
）
