Piston control valve PCV-5
In correspondence with low to high viscosity liquid materials, we are belonging to case back system
In correspondence with low to high viscosity liquid materials, we are belonging to case back system
Piston control valve PCV-5
・It supports wide liquid materials of low middle・high viscosity
Piston control valve.
・Piston stroke adjusting mechanism, anti-dripping
We are equipped with case back mechanism of this.
・1 port that conversion from syringe method is easily
Type /PCV-5-1P is line-up, too.
| Model | PCV-5-2P | PCV-5-1P |
|---|
| Drive system | 2 port control (fukudo piston) | 1 port control (spring offset type) |
|---|
| Valve structure | Poppet valve |
|---|
| The smallest dispensing volume | 50 mg |
|---|
| Adaptation liquid materials viscosity | ～300Pa・ s (～300,000cps) |
|---|
| Operation air pressure | 0.3 - 0.7MPa(3 - 7lgf/cm2) |
|---|
| Maximum Fluid feed pressure | 0.7MPa(7kgf/cm2) |
|---|
| Maximum reply number of times | 100 times of /min. |
|---|
| Connection diameter | Liquid entrance | φ 6 X φ 4 Fluid feed coupling |
|---|
| Liquid discharge opening | Lure lock |
|---|
| Air operation port | External diameter φ 6 one-touch coupling (with speed controller) |
|---|
| Operating temperature limits | 5～60 degrees Celsius |
|---|
| Weight (weight) | 320 g | 390 g |
|---|
| Wetted part material | Aluminum, SUS, fluoric resin, fluorine-containing rubber |
|---|
※Dispensing volume of this Specifications, adaptation viscosity, adaptation materials are reference levels.
Needle control valve N 
Needle control valve N 