Piston control valve PCV-5

In correspondence with low to high viscosity liquid materials, we are belonging to case back system

・It supports wide liquid materials of low middle・high viscosity

Piston control valve.

・Piston stroke adjusting mechanism, anti-dripping

We are equipped with case back mechanism of this.

・1 port that conversion from syringe method is easily

Type /PCV-5-1P is line-up, too.

Model		PCV-5-2P	PCV-5-1P
Drive system		2 port control (fukudo piston)	1 port control (spring offset type)
Valve structure		Poppet valve
The smallest dispensing volume		50 mg
Adaptation liquid materials viscosity		～300Pa・ s (～300,000cps)
Operation air pressure		0.3 - 0.7MPa(3 - 7lgf/cm²)
Maximum Fluid feed pressure		0.7MPa(7kgf/cm²)
Maximum reply number of times		100 times of /min.
Connection diameter	Liquid entrance	φ 6 X φ 4 Fluid feed coupling
	Liquid discharge opening	Lure lock
	Air operation port	External diameter φ 6 one-touch coupling (with speed controller)
Operating temperature limits		5～60 degrees Celsius
Weight (weight)		320 g	390 g
Wetted part material		Aluminum, SUS, fluoric resin, fluorine-containing rubber

※Dispensing volume of this Specifications, adaptation viscosity, adaptation materials are reference levels.

	FDW(DAWEI)
	No. 719-720, 7th floor, Thanh Dat 1 Building， No. 3 Le Thanh Tong Street, May To Ward, Ngo Quyen Dis
	84 0393777211 (Mr Phi)