Needle control valve NCV-7DV

It is Suitable in fixed-quantity dispense of anaerobic liquid materials

・By wetted part fluoric resin Specifications, it is most suitable for fixed-quantity dispense of anaerobic liquid material.

・Needle control valve that fixed-quantity dispense of liquid material with filler is possible.

Model		NCV-7DV-2P
Model		NCV-7DV-2P
Drive system		Air operation rate type
The smallest dispensing volume		8μL
Adaptation viscosity		... 10Pa, s
Operation air Supply pressure is		0.3 - 0.4MPa
Liquid material Supply pressure range		Up to 0.7MPa
Maximum reply number of times		650 times of /min.
Connection diameter	Liquid material supply port	φ 6 X φ 4 Fluid feed coupling
	Liquid material discharge opening	Lure lock
	Operation air	One-touch coupling for external diameter φ 6 tube (with speed controller)
Operating temperature limits		5～50 degrees Celsius
Wetted part material		Fluoric resin, fluorine-containing rubber
Weight		450 g
Adaptation liquid material		Anaerobic materials, materials with filler

※ Dispensing volume of this Specifications, adaptation viscosity, adaptation materials, the greatest reply number of times are reference levels.

	FDW(DAWEI)
	No. 719-720, 7th floor, Thanh Dat 1 Building， No. 3 Le Thanh Tong Street, May To Ward, Ngo Quyen Dis
	84 0393777211 (Mr Phi)